网站标志
商品搜索
您好!欢迎光临缅甸万丰国际-13187589555 
点评详情
发布于:2019-4-30 23:21:21  访问:1375 次 回复:0 篇
版主管理 | 推荐 | 删除 | 删除并扣分
Creating Picture Frames Recommendations
You will discover five effortless actions to framing.
Phase one - How to Slice Mats
Including a colour border (the mat) around your artwork enhances the image and gives a restful space in between the graphic as well as photo body. The color and size on the mat board needs to be determined initially, as this could determine the overall proportions of the picture body. You begin by calculating the external dimensions with the mat.
To cut the mat utilize a top quality bevel mat cutter and ruler. You will find quite a few slicing units to suit a variety of budgets and ability ranges, including the Mat Grasp Product 660 for that hobbyists, for the Mat Learn 860B or 1060B for the eager dwelling image framer.
Mark the borders to generally be slash to the back again from the mat board.
Be sure the mat will go over the edges of your artwork, by subtracting approx. 3mm or 1/8\" with the picture dimension (length & width). Lower the mat following the instructions for your mat cutter. Attach the picture to the mat using 2 small pieces of acid free tape around the top edge only.
Stage 2 - The way to Minimize the picture Frame
How much photo body moulding material will I need? Carefully measure the picture and mat you wish to frame. Add an extra (3mm) for \"play\" to ensure the image fits easily into the finished photograph frame.
Add the size (L) and width (W) together, then multiply the total by 2 to give you the general size. You also have to allow for that mitre cuts, so multiply the width (W2) on the moulding by 10 and add this to your total.
(L + W) 9 x 12 frame 2 + (W2 x 10) = TOTAL
Making the 45 degree mitre cut in your framing material is most important - your joining will only be as excellent as your cutting. Always make use of a high quality manual Mitre Saw... we recommend the Proman hand saw which is made in Sweden as the best to the market. Electric powered Drop Saws are not ideal for reducing small delicate picture frames.
Very good Measure System helps to make measuring quick and eliminates many mistakes. Once you have minimize the to start with mitre, slide the picture frame material along to the required length to the measuring scale, and set the stop. You are now ready to chop the very first 2 pieces of your respective picture frame. Change the settings to chop the other 2 sides with the body.
Reducing one side for a frame is quick.
Cutting the second side to be be the same as the to start with, is the hard part. With the FrameCo Ezy-Measure System you can slash accurately every time.
Step 3 - The way to Clamp Frames
How do you Clamp the Body? Clamping the frame tightly is essential for superior joining. You can use the a Cord Clamp, or the Steel Strap Clamp to secure the image frame ready for joining.
The advantage with the Strap Clamp is that you can see all the four corners of the photo frame clamped together before joining. So alignment with the corners is uncomplicated.
All corners should match up evenly. Apply a little wood glue to all corners on the frame for added strength. Carefully tension the clamp producing certain that the corners are aligned then secure the clamp tightly.
You are now ready for joining.
Step 4 - How to Join Frames
Most image frames are joined with a V-Nail. This is the easiest method and it is what the professional picture framer uses. The FrameCo PushMaster joining tool, inserts V-Nails into the corner from the frame. Two V-Nails in each corner is usually all that is necessary.
The PushMaster can be used by hand alone on most picture frames, or you can tap the PushMaster with a mallet if the frame is hardwood. The PushMaster can be upgraded for the BenchMaster® which will insert V-Nails into the harderst of timbers.
V-nails: How do they work?
Upon entry, the sides on the V-Nail are deflected outwards. As it pulls back into its original shape, the join is pulled together. The little curl around the edge on the V-Nail locks the nail into the grain with the timber. Glue alone is not sufficient for strong stable joints, by introducing a V-Nail you achieve a strong, tight joint. Which V-Nail sizing . . . You make use of a V-Nail about 1/2 the frame height.
Sizes are: 7mm - 1/4\", 10mm - 3/8\", 12mm - 1/2\", 15mm - 5/8\"
Stage 5 - The best way to Finish Frames
Take the empty photo frame to a glass merchant and have them slash a piece of glass for you. If you wish to chop glass yourself use a good quality oil filled cutter, or the Glass Cutter. Use only 2mm plain or non-reflective glass.
Fome Core is the ideal backing board as it is light weight, acid free and uncomplicated to chop. You can also use 3mm MDF or cardboard. Place the empty body face down and insert the glass, then the matted image and lastly the backing board.
Use the PushMaster to insert brads or flexipoints into the rear of the picture frame to hold everything in place.
Use Backing Nails for large frames or heavy items. Flexipoints are flexible and ideal for needlework or when you want to re move the picture, eg. photo frames.
To seal the artwork in the body, tape over the brads/flexipoints using a superb excellent backing tape. This will prevent dust or insects getting into the picture.
共0篇回复 每页10篇 页次:1/1
共0篇回复 每页10篇 页次:1/1
我要回复
回复内容
验 证 码
看不清?更换一张
匿名发表